1 Kit EVA marine deck boat flooring Bayliner 32 Anti-slip mat
$1,299.00原价为：$1,299.00。$1,199.00当前价格为：$1,199.00。
Elevate your boat’s surfaces with marine-grade EVA foam material!
It dissipates heat far more efficiently than natural teak and boasts 100% UV resistance. After 3,000 hours of UV testing, it remains stable and durable, withstanding outdoor exposure without aging.
The material inherently offers superior slip resistance and high waterproofing, with low heat absorption. It feels soft and comfortable underfoot while providing excellent shock absorption.
Durable and resistant to cracking, warping, or breaking, its lightweight texture conceals a sturdy structure that resists damage during use.
The backing features self-adhesive tape for secure bonding and easy assembly. Cutting, installation, and cleaning are effortless and efficient, requiring no complex tools.
Its eco-friendly, recyclable nature aligns with sustainable principles while effectively protecting vessel surfaces from abrasion. This material strikes the perfect balance between practical performance, comfortable experience, and convenience, making it an ideal choice for diverse marine applications.
Feature：Fast Cooling, Anti-Skid, Lightweight but Durable, Crack Resistant, Comfortable for Bare Feet, No Warping or Splitting, Easy to Clean
Exceptional Anti-Slip Performance
EVA foam boat flooring adopts high-friction EVA material with special textured or raised surfaces, effectively boosting friction to prevent slips and falls caused by wetness. It maintains reliable anti-slip performance even in damp environments. Outstanding Water & Corrosion Resistance
Tailored for marine use, the flooring features EVA’s inherent water resistance, effectively resisting seawater erosion. It avoids mold, deformation and rot, ensuring long service life in harsh marine conditions. Comfortable Cushioned Experience
Equipped with excellent buffering effect, the EVA foam flooring provides a more comfortable walking experience for crew and tourists. It relieves foot fatigue during long-time activities on the yacht. UV-Resistant & Durable Design
Built with UV-resistant EVA material, the flooring prevents fading, aging or embrittlement caused by prolonged sun exposure, maintaining stable performance and appearance. Easy Cleaning & Flexible Installation
The surface prevents water accumulation, allowing easy cleaning via water rinsing or dedicated detergent wiping. It comes with self-adhesive backing for free cutting/installing, or modular splicing for custom fitting to deck sizes and shapes.
1) Only install EVA Decking in temperatures between 50° F to 100° F (10° C to 38° C)
2) Do not attempt to adjust or move once the installation process has begun.
3) To prevent distortion, avoid pulling, stretching, or compressing pads during installation.
Preparation
Use acetone and a clean rag to remove all grease, adhesive, mold-release, wax, dirt, and other substances from the areas where EVA Decking is going to be installed. Next, use isopropyl alcohol and a new clean rag to remove all leftover residue. Ensure the area is completely dry before continuing (approximately 30-60 seconds after the acetone was applied).
Installation
1) Before pulling back any paper backing, lay out the pads in their designated locations to verify that the fit and spacing is correct.
2) Identify the first pad to install, then turn the pad over so that the adhesive backing is face up With a sharp razor knife, carefully cut the paper adhesive backing from the center of the pad towards the edges (center to top edge, center to bottom edge) to ensure it does not rip. Be sure to completely cut through the adhesive backing but DO NOT cut into the pad.
3) Now starting from the center cut you just made, peel back 2″ (5 cm) of the paper backing and fold to crease it. Repeat on the other side. Fold both pieces of the paper backing in place to cover the adhesive.
4) Turn the pad back over and reposition it exactly where you want it installed.
5) Firmly secure one side of the pad to the surface area using masking tape. Taping prevents the pad from moving.
6) Lift up the side that is not taped down and peel the paper backing to the crease. Gently lay the pad back in place.
7) Firmly press down on the pad where the exposed adhesive is. Apply pressure from the center of the pad outward (center to top, center to bottom) to ensure no air is trapped beneath the pad.
8) Continue to line the pad and peel back the paper backing to expose an additional 2″ – 3″ (5cm-7.5cm) and repeat step 7 Continue until one complete side of the pad is adhered.
9) Once the first side is complete, remove the masking tape and repeat steps 7 and 8 for the other half of the pad. Apply even pressure to the pad to ensure a firm bond between the pad and the surface area.
10) Firmly press down on all edges to ensure no water will permeate the pads.
Tips:
It’s recommended to wait 1-2 hours after installation before using the deck to allow the glue to penetrate the deck and secure it.
Maintainance
1) If stained with fish blood, red wine, or other colored liquids, rinse with water as soon as possible before the liquid dries.
2) Do not apply pressure to a small area. If pressure is necessary, apply pressure to the entire EVA foam pad.
3) Avoid excessive heat exposure. Localized, sudden heat can cause the material to shrink and damage the internal structure. Note: The glass refraction focal point on the hull generates high temperatures.
4) If peeling occur, please clean the surface well, and re-adhere the deck with additional glue, such as 3M PSA, spray adhesive, polyurethane glue.
评价
目前还没有评价