1 Kit EVA Foam Marine Boat Flooring 6mm 2008-2012 SeaDoo
$799.00原价为：$799.00。$699.00当前价格为：$699.00。
Marine Grade EVA Foam
Cool faster than real teak
100% UV resistant, anti-UV over 3000 hrs
Anti-skid, High waterproofing, low endothermic
Nature Light weight, but reasonable structure, so not easier to crack
Comfort for bare feet, no cracking, warping and splitting : Shock absorption, soft yet durable
Protection for surfaces, easy to stick and assembling
Backside with 3M self-adhesive tape
Easy to cut, easy to install, easy to clean
Eco-friendly recyclable
We specialize in EVA foam non-slip flooring for yachts, with full compliance to CE, ISO, and SGS certifications to meet strict quality standards for marine applications.
The yacht mats are crafted from eco-friendly materials—EVA foam (Ethylene-vinyl Acetate Copolymer) and PE, plus recyclable components—boasting 60-65° Shore C hardness, 160-180kgs/M³ density, and ≤0.01% water absorption for long-term marine use.
Key functional features include fast cooling, anti-skid performance, lightweight durability, crack resistance, barefoot comfort, no warping/splitting, easy cleaning, and over 3000hrs of UV resistance (tested by SGS) to withstand harsh marine environments.
We offer yacht brand-specific customization: choose from color combinations (e.g., popular teak tones with black/white/grey lines or custom schemes) and personalized elements like custom patterns, textures, or laser-engraved logos (e.g., yacht brand emblems, names).
Each mat uses 3M 99786 self-adhesive and is precision-cut via advanced CNC machines, ensuring accurate shapes, clean edges, a perfect fit for specific yacht models, and support for complex, brand-aligned pattern customization.
1 Kit EVA Foam Marine Boat Flooring 6mm 2008-2012 SeaDoo
Strong Environmental Adaptability: This EVA foam anti-slip flooring has passed SGS 3000-hour UV resistance testing with water absorption ≤0.01%, withstanding sun exposure and seawater erosion during yacht voyages while maintaining durability over extended use.
High Safety & Comfort: The EVA material with 60-65° Shore C hardness combines slip resistance with comfort, featuring rapid cooling and crack resistance to ensure safe boarding and an enhanced experience.
Deep Brand Customization: We support yacht brand-specific customization—from color schemes (e.g., teak-tone with black/white/gray accents) and laser-engraved logos (brand insignia, yacht names) to textured patterns—creating exclusive brand visual signatures.
Precision Fit Installation: Advanced CNC precision cutting ensures clean edges and exact dimensions, perfectly matching various yacht deck models. Paired with 3M 99786 self-adhesive backing for easy, secure installation.
Eco-Friendly & Durable: Crafted from EVA foam (ethylene-vinyl acetate copolymer) and recyclable materials, balancing environmental sustainability with lightweight durability. This approach aligns with green principles while reducing yacht load.
Installation Recommendations
1) Only install EVA Decking in temperatures between 50° F to 100°F (10°C to 38° C)
2) Do not attempt to adjust or move once the installation process has begun.
3) To prevent distortion, avoid pulling, stretching, or compressing pads during installation.
Preparation
Use acetone and a clean rag to remove all grease, adhesive, mold-release, wax, dirt, and other substances from the areas where EVA Decking is going to be installed. Next, use isopropyl alcohol and a new clean rag to remove all leftover residue. Ensure the area is completely dry before continuing (approximately 30-60 seconds after the acetone was applied)
Installation
1) Before pulling back any paper backing, lay out the pads in their designated locations to verify that the fit and spacing is correct.
2) Identify the first pad to install, then tum the pad over so that the adhesive backing is face up With a sharp razor knife, carefully cut the paper adhesive backing from the center of the pad towards the edges (center to top edge, center to bottom edge) to ensure it does not rip. Be sure to completely cut through the adhesive backing but DO NOT cut into the pad.
3) Now starting from the center cut you just made, peel back 2″ (5 cm) of the paper backing and fold to crease it. Repeat on the other side. Fold both pieces of the paper backing in place to cover the adhesive.
4) Turn the pad back over and reposition it exactly where you want it installed.
5) Firmly secure one side of the pad to the surface area using masking tape. Taping prevents the pad from moving.
6) Lift up the side that is not taped down and peel the paper backing to the crease. Gently lay the pad back in place.
7) Firmly press down on the pad where the exposed adhesive is. Apply pressure from the center of the pad outward (center to top, center to bottom) to ensure no air is trapped beneath the pad.
8) Continue to line the pad and peel back the paper backing to expose an additional 2″-3″(5 cm’-7.5 cm) and repeat step 7 Continue until one complete side of the pad is adhered.
9) Once the first side is complete, remove the masking tape and repeat steps 7 and 8 for the other half of the pad. Apply even pressure to the pad to ensure!a firm bond between the pad and the surface area.
10) Firmly press down on all edges to ensure no water will permeate the pads.
Tips:
It’s recommended to wait 1-2 hours after installation before using the deck to allow the glue to penetrate the deck and secure it.
1) If stained with fish blood, red wine, or other colored liquids, rinse with water as soon as possible before the liquid dries.
2) Do not apply pressure to a small area.If pressure is necessary, apply pressure to the entire EVA foam pad.
3) Avoid excessive heat exposure. Localized, sudden heat can cause the material to shrink and damage the internal structure. Note: The glass refraction focal point on the hull generates high temperatures.
4) If peeling occur, please clean the surface well, and re-adhere the deck with additional glue, such as 3M PSA, spray adhesive,polyurethane glue.
评价
目前还没有评价